Time: 8:00 a.m. – 5:00 p.m. This course provides the initial EPA/HUD and state requirements for Project Designers who will design and develop specifications for lead paint hazard control projects in target housing and child-occupied facilities. Completion of the Lead Paint Supervisor Initial Course is a prerequisite for this session. Note: Respirator fit (more…)
The First Aid, CPR and AED course is provided by National Safety Council accredited instructors and meets OSHA requirements. Individuals successfully completing this course will receive a National Safety Council certification card as well as OSHA Bloodborne Pathogens training. Course completion requirements include a written test and practical exercises. This course will require approximately 7-8 (more…)
This course meets the annual refresher training requirements promulgated by OSHA/EPA for HAZMAT Technicians, Specialists, and Incident Command personnel. Annual training requirements are completed for Respiratory Protection (including annual fit testing), Fire Extinguisher Use and PPE. Note: Respirator fit testing may be provided during these sessions for individuals who are medically cleared and clean-shaven (more…)
This course meets initial training requirements of the EPA, OSHA, and state agencies for individuals who perform asbestos abatement. Additionally, training requirements are completed for compliance with the following OSHA Standards: Respiratory Protection (fit testing), Fire Extinguisher Use, Personal Protective Equipment, Fall Protection, and Bloodborne Pathogens exposures. Note: Respirator fit testing may be provided (more…)
This course meets the triennial refresher training requirements of the U.S. EPA/HUD and state agencies. It meets OSHA annual Lead Hygiene and Hazard Communication training requirements. Additionally, training requirements are completed for compliance with OSHA Respiratory Protection Standards (including fit testing). Note: Respirator fit testing may be provided during these sessions for individuals who (more…)
This course provides the annual refresher training requirements of EPA/OSHA for asbestos workers. Additionally, annual training requirements are completed for the following OSHA Standards: Respiratory Protection (fit testing), Fire Extinguisher Use, and Fall Protection. Note: Respirator fit testing may be provided during these sessions for individuals who are medically cleared and clean-shaven in the (more…)
This course meets the annual refresher training requirements of EPA/OSHA. Additionally, annual training requirements are completed for the following OSHA Standards: Respiratory Protection (including annual fit testing), Fire Extinguisher Use and Fall Protection. Note: Respirator fit testing may be provided during these sessions for individuals who are medically cleared and clean-shaven in the area (more…)
Time: 8:00 A.M. – 12:00 P.M. This course meets the annual refresher training requirements of EPA/OSHA for continued certification. Additionally, annual training requirements are completed for the OSHA Respiratory Protection Standards (including fit testing) and the U.S. DOT Triennial rule for individuals who will ship HAZMAT (asbestos). Note: Respirator fit testing may be (more…)
Event Phone: 570-291-0030
This 3-Hour AHERA Designated Person course trains individuals on EPA asbestos guidelines. As per federal regulations, this course is designed for building managers in school districts and other facilities where an AHERA Designated Person is required. Attendees of this course will learn important information about asbestos management planning, asbestos emergencies, inspections, and recordkeeping. This course (more…)
This course meets the requirements for Certified Renovators under the EPA’s Renovation, Repair and Painting (RRP) Rule, required for any renovation work in pre-1978 housing or child-occupied facilities. This course also meets the requirements for HUD Lead Safe Work Practice Training. Certification is limited to Pennsylvania and any other state without an EPA qualified state (more…)
Time: 8:00 A.M. – 12:00 P.M. This course provides the triennial refresher training requirements of the U.S. EPA/HUD and state agencies for this discipline. It meets OSHA annual Lead Hygiene and Hazard Communication training requirements. Note: Respirator fit testing may be provided during these sessions for individuals who are medically cleared and clean-shaven (more…)
This exercise meets the annual drill requirements for individuals who will perform rescue services at PRCS operations. Additionally, individuals complete annual respiratory protection training (including fit testing) for SCBA and SAR. Note: Respirator fit testing may be provided during these sessions for individuals who are medically cleared and clean-shaven in the area of the (more…)
The Entrant, Attendant, Supervisor (EAS) Course is an 8-Hour OSHA Permit Required Confined Space (PRCS) session that includes the following elements: • Initial training requirements for PRCS EAS applicable to the entry of PRCS • Respiratory Protection Training in accordance with 29 CFR 1910.134 including fit testing for the use of self-contained breathing apparatus and (more…)
This course provides the initial training requirements of the OSHA construction and general industry standards applicable to the entry of permit required confined spaces. Individuals completing the rescue component of the class meet the OSHA Respiratory Protection training requirements (including fit testing) for the use of SCBA and SAR. Note: Respirator fit testing may (more…)
This course provides the annual refresher training requirements of EPA/OSHA for asbestos workers. Additionally, annual training requirements are completed for the following OSHA Standards: Respiratory Protection (fit testing), Fire Extinguisher Use, and Fall Protection. Note: Respirator fit testing may be provided during these sessions for individuals who are medically cleared and clean-shaven in the (more…)
The Nestle Purina Contractor Safety Training is offered only at our Mechanicsburg, PA location. This training is a required component for all Nestle Purina contractors who will or who are currently working at/with the Nestle Purina Plant located in Mechanicsburg, PA and is a review of safety procedures and requirements, including Good Manufacturing Procedures. This (more…)
The U.S. Department of Labor, Occupational Safety and Health Administration (OSHA) 30-Hour Construction Industry course provides a variety of training to supervisors and workers with some safety responsibility. Training will emphasize hazard identification, avoidance, control and prevention, not OSHA standards. All sessions will be instructed by OSHA-authorized outreach trainers. Note: Respirator fit testing may (more…)
This course provides the initial EPA/HUD and state requirements for workers and supervisors of de-leading operations in target housing and child-occupied facilities. It meets OSHA Lead Hygiene and Hazard Communication requirements. Additionally, training requirements are completed for compliance with the following OSHA Standards: Respiratory Protection (including fit testing), Fire Extinguisher Use, Fall Protection, and Personal (more…)
Time: 8:00 a.m. – 5:00 p.m. This course provides the initial EPA/HUD and state requirements for workers and supervisors of de-leading operations in target housing and child occupied facilities. It meets OSHA Lead Hygiene and Hazard Communication requirements. Additionally, training requirements are completed for compliance with the following OSHA Standards: Respiratory Protection (including fit (more…)
Time: 8:00 a.m. – 5:00 p.m. This course provides the initial EPA/HUD and state requirements for workers and supervisors of de-leading operations in target housing and child-occupied facilities. It meets OSHA Lead Hygiene and Hazard Communication requirements. Additionally, training requirements are completed for compliance with the following OSHA Standards: Respiratory Protection (including fit testing), (more…)
This course meets initial training requirements of the EPA, OSHA, and state agencies for individuals who perform asbestos abatement and EPA and OSHA requirements for on-site competent persons. Additionally, training requirements are completed for the following OSHA Standards: Respiratory Protection (fit testing), Fire Extinguisher Use, Personal Protective Equipment, Fall Protection and Bloodborne Pathogens exposures. National (more…)
This course meets initial training requirements of the EPA, OSHA, and state agencies for individuals who perform asbestos abatement. Additionally, training requirements are completed for compliance with the following OSHA Standards: Respiratory Protection (fit testing), Fire Extinguisher Use, Personal Protective Equipment, Fall Protection, and Bloodborne Pathogens exposures. National Safety Council First Aid/CPR certification is included. (more…)
This course meets the three (3) year training requirements promulgated by the PA DEP Storage Tank Division for recertification of UMR/AMR-certified individuals. The course is targeted for current UMR/AMR certified tank removers to meet the technical PA DEP-required recertification training. Certification is awarded to individuals who successfully complete attendance and competency testing requirements for this (more…)
This course provides the initial training requirements of the OSHA construction and general industry standards applicable to the entry of permit required confined spaces. Individuals completing the rescue component of the class meet the OSHA Respiratory Protection training requirements (including fit testing) for the use of SCBA and SAR. Note: Respirator fit testing may (more…)
This exercise meets the annual drill requirements for individuals who will perform rescue services at PRCS operations. Additionally, individuals complete annual respiratory protection training (including fit testing) for SCBA and SAR. Note: Respirator fit testing may be provided during these sessions for individuals who are medically cleared and clean-shaven in the area of the (more…)
This course meets the initial EPA and HUD training requirements for this discipline in public housing and child occupied facilities. Note: Lead Inspector certification is a pre-requisite for this class. Note: Respirator fit testing may be provided during these sessions for individuals who are medically cleared and clean-shaven in the area of the facepiece (more…)
This course provides the triennial refresher training requirements of the U.S. EPA/HUD and state agencies for this discipline. It meets OSHA annual Lead Hygiene and Hazard Communication training requirements. Note: Respirator fit testing may be provided during these sessions for individuals who are medically cleared and clean-shaven in the area of the facepiece seal. (more…)
The U.S. Department of Labor, Occupational Safety and Health Administration (OSHA) 30-Hour General Industry course provides a variety of training to supervisors and workers with some safety responsibility. Training should emphasize hazard identification, avoidance, control and prevention, not OSHA standards. All sessions will be instructed by OSHA-authorized outreach trainers. Topics covered include the following mandatory (more…)
The Outreach Training Program provides basic safety and health information and education — it does not fulfill an employer’s requirement to provide training under specific OSHA standards. The OSHA Outreach Training Program for General Industry provides training for workers and employers on the recognition, avoidance, abatement, and prevention of safety and health hazards in workplaces (more…)
This 4-hour course meets OSHA annual training requirements for incipient fire brigades (LIVE FIRE EXERCISE) and completes HAZMAT AWARENESS for individuals who respond to the initial stages of emergency events. Note: NSC First Aid/CPR is not included, required on a 2-3 year cycle. (more…)